Club Cobra - Progress Update: Wiring

Club Cobra (http://www.clubcobra.com/forums/)

- Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)

- - Progress Update: Wiring (http://www.clubcobra.com/forums/australian-cobra-club/74185-progress-update-wiring.html)

Progress Update: Wiring

Since everyone else is posting such great progress pics I thought I'd share some of the stuff I've been up to lately.

I've been working towards firing this thing up and the last thing that needs finishing before turning the key is the wiring loom. I've made it a bit modular and the engine loom is largely seperate from the rest of the loom. It'll have a couple of connectors to seperate it from the main loom. The engine loom itself is pretty much all done with only the main feeds for power and fuel pupmp control needing to be connected to their different relays.

http://www.clubcobra.com/photopost/d...ngine_loom.jpg

The ECU is mounted in the top of the foot box. I machined up a couple of brackets that clamp it in place. It's well out of the way but still easy to remove if needed. You can see the re routed cabling for the coils in the foot box and their new coil looms. The original loom was all the wrong shape for the new brackets.

http://www.clubcobra.com/photopost/data/500/ECU.jpg

The other thing I've done is finally get some plug leads made. They have turned out really good and I'm very happy with the results of the coil relocation. The headers on the motor at the moment are the under body system for rego and they tuck in nice and close to the block.

http://www.clubcobra.com/photopost/d...ngine_bay1.jpg

Hope your all having a good weekend.

Cheers

Looking good Mike

Noticed that you've put a stake in the ground and will be driving at ShelbyFest.
(Me too)

Looking forward to seeing this beauty in the flesh.

Keep up the good work - and the photo posts

LoBelly

I'll race ya Mikey!
Looking good infact a little too advanced for my likeing...

I've just got to have this thing on the road soon. At the rate I've been going there'll be no fuel left when I'm finished.

Yep, I'm determined to have my Cobra at Shelbyfest. Even if I have to push the car round the track. Are you going to be ready for Shelbyfest too Gav?

I've been working on the imobilizer wiring. I bought one a while back that uses an electronic key on the dash but after talking to a couple of people they thoiught this was a pain to use (especially if you want to get going in a hurry). I bought another one that uses a remote control so you can have the thing disable before you get in the car. I'm also making the imobilizer part of the loom so it should be harder to trace and hot wire the car.

Cheers

Good stuff Mike! I'll race you at Shelby Fest too! :)

The old house goes on the market this weekend so it is full steam ahead from here on!!
I would like to have the car drivable for the Shelby fest, so heres the plan Mike between us it won't be the fastest but who has the least gremlins to sort out:CRY: :CRY:

Gav and Aussie Mike

Keep going guys and get them ready. Look forward to seeing them both at the Shelby Fest. as I was unable to catch up at the Nationals at Wakefield Park Raceway.

Bernie

Mike,

I have a pin code system on my WRX, which as you say is a pain when you need to get away quickly.

However, I find it useful in that the time taken to pin the code in gets you to look around (from a safety viewpoint) prior to driving off.

How often have we started a car and driven off thinking we have looked when really we have not.

Looking good.

Hey Aussie,

Love the work, especially the leads, they look fantastic.

STIFFY

Nice work on the engine bay mike looks trick
not long to go now
cheers
jess