Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Cold air in take for CR (http://www.clubcobra.com/forums/australian-cobra-club/74327-cold-air-take-cr.html)

slow 427 11-09-2006 04:02 PM

Cold air in take for CR
 
4 Attachment(s)
Hi guys , this is an one easy way to build yourself a cold air in take for your Classic Revival.
Attachment 11938

Attachment 11939

Attachment 11940

Attachment 11941
One tip make sure that the front wheel doesnt fowl on full lock or when the wheel is at full bump.

Beejay 11-09-2006 06:40 PM

Looks good.

Any other car pics?

Ben

Aussie Mike 11-09-2006 10:10 PM

Nice work.

Did you make the duct yourself?

Cheers

Classic Revival 11-10-2006 11:27 PM

What type of filter are you using in the duct?
See attached pic our cold air intake through the scoop.
Cheers,
Ian

Bryan Wilson 11-11-2006 12:22 AM

Quote:

Originally Posted by Classic Revival
See attached pic our cold air intake through the scoop.
Cheers,
Ian

opps what pic :confused:

Cobra.au 11-11-2006 01:03 AM

Just something to note: The bonnet scoop will not flow enough air for forced induction so the brake duct might even starve a N/A engine.

Just some info that I learned the hard way.

Cheers

pneall 11-12-2006 06:33 PM

Slow427,

Wish I saw those before I bought my brake cooling ducts:CRY:

Craig is probably right . You wil be OK if you are using one from each side though.

Regards,

Phil:)

slow 427 11-13-2006 04:15 AM

Air in take
 
Phil im using 100 mm ID hose and both in takes are being used.
They should flow very well.
Here's hope


All times are GMT -7. The time now is 09:04 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: