|
Queensland dragracing.
Hi guys its on again the boost crusing drag day. sunday 15th april 9am to 3pm It was a well run event last time and a few members joined in fun it is limited to 80 cars for the whole day so you will get plenty of runs you can split the cost by having multipul drivers in the 1 car (hint hint any one need an extra driver . )
cost is the same as last time at $85.25 payable by direct depsoit into a holding acct so that if the day gets canceled you will get your money back. that does not include a rain out. follow the link to the boost crusing site for all your info it if you want to go you should register on the forum and add your name to the link . http://www.boostcruising.com/forums/...ntry1280649185 regards oz. |
| All times are GMT -7. The time now is 02:15 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: