|
Hi all , new to the forum and cobra ownership with a few questions.
Hi everyone.
Ive just bought myself a rmc and have a few questions please. my car is 351 windsor, toploader. ive already embarked on a few changes, but want to do some more, that im hoping u guys can help with. Ive just finished fitting side pipes and twin roll bars, but i want to update to efi. I have availble to me a damage ed xr8 manual which i plan on using as the donor car to get my motor and box, im fine with the mechanical side of things, but need help on the wiring. Does anyone have a diagram to help me wire it myself or alternatively if anyone can recommend someone in melb who could wire it up for me. Thanks in advance for any help Dean |
Hi Dean,
Congratulations on the new car, how about some pictures of your new toy? I also have an RMC, mine has a 302 Windsor from an AU. If your XR8 engine has the wiring harness and the engine management computer then you will be OK as it is not too hard to overcome the security in the earlier Ford ECU's. If you don't have the ECU then there are several local companies that manufacture ECU's that will work with your engine and most of them will be able to wire it in. There is not too much to do to modify the current RMC wiring to work with a later engine, most of us mount the ECU inside the passenger footwell at the top. If your original engine was from the US you will find that the starter motor in the XR8 engine is now on the passenger side so you will have to extend that wiring as well. Good luck, I am sure there are plently of people in Melbourne that will be able to assist you. Cheers Ross |
thanks ross, i will post some pics in a few days, ive just finished fitting side pipes and roll hoops and plan on doing the engine swap as soon as the weather turns nasty.
no replies as to my wiring issues yet. thanks dean |
Welcome to the madhouse acac.
What wiring are you confused about?. Engine, ecu or general chassis wiring?. |
hi rebel1,
the car is wired for the carby 351, so mainly factory ecu wiring for the efi 302 |
Dean,
You want to go from a carbed 351 to a efi 302 "WHY!!!" Cheers, Bryan PS Welcome to the forum |
Quote:
i guess i just like the reliability/economy of efi |
Hi Dean,
Welcome to the Forum. By the way how much for the carbied 351?I am thinking of going the other way. Cheers Brett |
Quote:
to be honest i havnt even thought about that, dont even know what a rebuilt with new everthing 10,000kms ago would be worth |
Welcome home, where are you in the world?
Did I miss it? |
melbourne, australia
|
Trularin
When you and the boy come over I'll show you Melbourne. See you again this year at Run N Gun..:confused: http://www.clubcobra.com/photopost/d...36DSCF0049.JPG And bring the truck over with you Cobra..:3DSMILE: |
i can come to melb and wire it up
or if u send me the engine loom i can wire it up and send it back to u with not much left to do and ill give u diagram of left over wires u will need to remove security with a security removal unit i think they are about 300 bucks but if u send me your loom and what dash u have i can get it as close as possible to yr dash for a cheaperprice than me flying down there to do it or if u want i can fly down for a weekend but its not cheap as im from sydney thanks jim |
| All times are GMT -7. The time now is 02:07 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: