![]() |
K&N pod filter oiling
G'day all
Bought a K&N pod filter some time ago and made up all bracketry to fit but wont do this until closer to start up but was reading the bumff in the packet about oiling these filters. I do know there is a branded filter cleaning kit but is there anything special to the reoiling of these filters? How have others reoiled their filters? Cheers |
Stephen, I've cleaned and re-oiled my K&N filter using their kit. Spray on the cleaner, let soak, rinse off with water. Don't use compressed air but let the filter thoroughly dry and then spray with the included oil. The kit contains plenty of both cleaner and oil to do the filter several times. My filter does have the instructions on it to oil before using but mine came pre-oiled. If the filter element is reddish color, its already oiled.
|
I've got the filter kit Slowy. I can bring the spray can of K&N oil along to one of the club meetings if you like.
Cheers |
Thanks guys.
I was planning to get a kit Mike in the first instance anyway just curious to know whether there is a non-proprietory way of oiling the kit. Cheers |
Bump - anyone out there??
Can no one indicate why the oiling requirement on these filters? Cheers |
Just spray along the pleats, don't overdo it as the oil will "wick" into the remaining area of the pleats. Spray the pleats lengthwise, let it sit for a while and look for any areas are not of a uniform color (red).
|
If you bought the filter new it should already be oiled.
|
| All times are GMT -7. The time now is 06:14 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: