|
Lining a Boot
I have some carbon fibre work going into the boot, but I'm looking at re-lining the rest with some good quality carpet.
Doestic carpet seems a bit stiff, so can anyone recommend a wilton type that is pretty pliable? And where do you get hold of it? Thanks |
A lot of the modern automotive carpets have a stiff plastic backing. They are designed to be molded to the shape of the floor with a bit of heat applied to the backing. You can readily shape this stuff using a heat gun and come up with a really professional result. Once you have the shape pull it out and get the edges bound ay a rug shop or motor trimmer.
Cheers |
Overlocking;)
|
| All times are GMT -7. The time now is 01:13 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: