|
Ok lesson learned!
Back onto the original topic, which Finish Line cap/base have people gone with? There's three caps (standard, locking, and 2" base all for $155) and a couple of bases separate. I will email them regarding price but I'm interested to hear which combination of cap/base is most suitable for our cars. Perhaps unleaded pumps are the same around the world, I dunno...? |
I was looking at the locking one from finishline as well. I can't see why this would not be ok in Australia with a sticker on the top saying unleaded fuel only. A bit of a silly requirment now, leaded fuel is not available anyway.
The only other thing I can think of is the anti syphon flap and the nozzle diameter. The old leaded fuel nozzles were a bigger diameter so they would not fit in an unleaded filler. I was just going to use a poor quality sticker that peels off easy. http://www.finishlineaccessories.com...roducts_id=383 |
The only thing I would question is the base. If you look on the Python site here in Melbourne:
http://python.au.com/main%20home.htm ...you'll see that his billet adapter looks very similar to the 2" cap base from Finishline: http://www.finishlineaccessories.com...products_id=57 Compare that to the open base cap from Finishline and you'll see how it doesn't taper in towards the bottom. Can anyone verify which base is the correct one for Australian pumps? |
Anyone want to see some pics of the filler from Snakebite send me ya email addy.
It comes in three pieces. Base Filler/reducer with lockable screw in plug Top has secondary roll over seal Very nice unit |
Sambo, Should be 5 pics in total.
They are pretty large so you can see what's involved. Cheers |
Cheers mate, plenty of detail in those shots. Cheers!
|
Think the caps come from Finishline ..:confused:
|
Yeah that's where I'm looking Bernie. The problem is they've got several caps and several bases (diff designs/diameters) and I don't want to have to send one back to the States - or end up with an expensive paper weight!
|
| All times are GMT -7. The time now is 01:26 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: