|
Passed Engineering
Hi All,
I'm over the moon having just passed the engineering side of my build. Bernie at Enkelmans was fantastic to chat with and even better, he passed the car without any problems. It has taken over 3 years of passing the beer fridge every time I needed a bolt, spanner or part. Now the party begins and just in time for summer, paint may have to wait until winter. Cheers, Dale. |
Dale, well done mate. To pass first time is a great achievement. :D
Yeah, the best time to pull it apart and send it off for paint is winter... If you get a chance can you post some pics. |
Great news Dale, Well done.
I might give you a call in the next couple of days regarding the Crapi, I mean Capri. |
Well done Dale. I hope the rest of the compliance process is smooth sailing as also!
Did Bernie pass those side pipes or have you fitted an under body system? |
Dale
Well done. I too found Bernie very helpful and a practical bloke not too hung up by all the bull@#$* from our regulators and clearly very aware of the tricks and twists available by both builders and parts suppliers out there!! Hope your VIN chasing process happens faster than mine seems to be doing! Cheers |
Bl00dy fantastic Dale - I had no idea you were so close. Should put some pics up! Congrats. :)
Edit - just checked your gallery - that dash is a work of art - love to see how it looks installed! http://www.clubcobra.com/photopost/d...145_Small_.jpg |
Well done Dale!
Get out cruising! Ben |
past engineering
well done Dale I'll have to pop down and have a look.
Cheers, Bryan |
Thanks Guys,
Some pics below. Its sitting about 50mm high in the arse and 30mm in the front. Ended up going 15 inch instead of 17's. Also have a under body shot aswell. These things are dangerous to drive, might have to get some track time up to see what it can really do. http://www.clubcobra.com/photopost/d...371_Small_.jpg http://www.clubcobra.com/photopost/d...372_Small_.jpg http://www.clubcobra.com/photopost/d...376_Small_.jpg http://www.clubcobra.com/photopost/d...368_Small_.jpg Cheers. |
Looks very presentable Dale. Where are those seats from?
|
Looks good Dale :)
I was looking through your gallery and noticed that you are running the MAF. Is it really connected or just a faker??? |
Bob,
I'm hoping its a faker, you did the program so I'll find out when I remove it. Seriously, only put on for engineering to avoid any problems. Sambo, Seats are from Laurie Bongalas and ARD approved. Very comfie to sit. Cheers, Dale. |
| All times are GMT -7. The time now is 04:10 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: