Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Update of my build. (http://www.clubcobra.com/forums/australian-cobra-club/84616-update-my-build.html)

Baz 01-21-2008 01:07 AM

Update of my build.
 
This is where we're up to at the moment. The imperfections in the body contours have been removed, the whole car has been filled, wet and dried dead smooth then undercoated. The under-belly has been coated with the thick, black, anti stone guard paint. http://www.clubcobra.com/photopost/d...ard_Small_.jpg


You will probably never see another Cobra painted this colour. Just use the old imagination and think what it's going to look like with the silver / grey GT stripes front to rear and all the chrome work fitted up, including the big polished Vintage knockoffs and side pipes.

At this time, it has only had one coat of colour. There are another two to go then five coats of clear, followed by the final flow-coat.
http://www.clubcobra.com/photopost/d...ody_Small_.jpg[img]


We are reay to start building. Check out those Spax adjustable Gas Shocks hanging off the front end.
http://www.clubcobra.com/photopost/data/500/Chassis_etc_on_rolling_assembly_frame_Small_.jpg[/img]

Beejay 01-21-2008 02:31 AM

Lookin good Baz,

Your car is going to be really cool. Are you going for a full show car? The underneath will be one of the best Cobras around.

I considered a very similar colour to yours, but have ended up sticking to my original plan of an orange pearl.

Cheers,

Ben

Rebel1 01-21-2008 03:22 AM

Tis looking great Baz. You're doing a great job.

As to the colour ... Seen it before .... It exists on a BRB cobra here in Brissy whose owner will remain nameless......until he shows up in here again.

Looks even better on the whole car.

and......

What are you doin with my spax shockies??

Philm 01-21-2008 03:29 AM

New Benchmark
 
Love the colour and love the work undernieth.

Phil

07cob 01-21-2008 02:06 PM

Agean
 
Baz

The colour is exactly like you described in a previous update post. If that is what you were trying to achieve, you have nailed it!! Well done.

Geof

Baz 01-21-2008 07:53 PM

Quote:

Originally Posted by Rebel1 (Post 806800)
Tis looking great Baz. You're doing a great job.

As to the colour ... Seen it before .... It exists on a BRB cobra here in Brissy whose owner will remain nameless......until he shows up in here again.

Looks even better on the whole car.

and......

What are you doin with my spax shockies??

Rebel

As a well known Qld Polly once said, "Please explain?"

Sorry, I had no idea that they were your Spax shockies Rebel. After forking out $1,274 for the four of them, I really thought that I owned them. Silly me.

Baz

Rebel1 01-21-2008 08:30 PM

Quote:

Originally Posted by Baz (Post 807080)
Rebel

As a well known Qld Polly once said, "Please explain?"

Sorry, I had no idea that they were your Spax shockies Rebel. After forking out $1,274 for the four of them, I really thought that I owned them. Silly me.

Baz

Hehehe Nuh, that was a fish and chip shop owner wot said that Baz.;)

The shocks are the same as mine Mate. Where ya gettin the 57mm springs for them? :)

Cheers

boxhead 01-21-2008 10:13 PM

These are my Spax shocks.
http://www.clubcobra.com/photopost/d...64MVC-003S.JPG

http://www.clubcobra.com/photopost/d...64MVC-001S.JPG


I got mine as springs and shocks inc freight to Alice for $1500 from Fulcrum in Brisbane.
I delt with a guy by the name of Matt on 07-38929000

Baz 01-21-2008 10:21 PM

Quote:

Originally Posted by boxhead (Post 807124)
These are my Spax shocks.
http://www.clubcobra.com/photopost/d...64MVC-003S.JPG

http://www.clubcobra.com/photopost/d...64MVC-001S.JPG


I got mine as springs and shocks inc freight to Alice for $1500 from Fulcrum in Brisbane.
I delt with a guy by the name of Matt on 07-38929000

Boxhead,

Because you showed me yours, does that mean I've got to show you mine?

Baz.

Baz 01-21-2008 10:23 PM

Quote:

Originally Posted by Rebel1 (Post 807097)
Hehehe Nuh, that was a fish and chip shop owner wot said that Baz.;)

The shocks are the same as mine Mate. Where ya gettin the 57mm springs for them? :)

Cheers

Rebel,

Neil Streeting acquired my coil-overs for me. Don't know where he got them from, but at that price, they better work well.

Baz

sambo 01-21-2008 10:30 PM

They seem like a good alternative to the AVO shocks... did you guys consider other brands and if so, what made you go for the Spax? Also, what are the min/max travel lengths for the CR? Thanks

pneall 01-22-2008 04:10 AM

Baz,

Your combo is looking excellent. You will have a seriously quick machine with the LS2 and tiptronic.

Phil:)


All times are GMT -7. The time now is 02:54 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: