|
OZVENOM - reluctor in distributor
Hey Scott - can you remember if we (you) left the number 1 cylinder reluctor in the dissy when we were setting things up. No drama if you can't remember, but someone was about to set theirs up with the reluctor 90 degrees before #1.
Let's just say that it's something that I remember thinking about at the time, but now the specific details of the Cobra build are fading away. Is that the onset of old age??? |
only one
Hi Craig i think we left one lobe on the dizzy as a home signal and set it up 40 or 50 deg btdc .hope this helps
scott. |
| All times are GMT -7. The time now is 03:49 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: