|
Another CR on the road
Hi Everyone,
I haven't been on the site for sometime but I have finally succeeded in being able to drive my car legally. It is now having the post rego operation so it sounds more like a cobra than a prius(or whatever that scalelectric car is). Just one word about the rego, my cars engineering report was completed on the 22nd of Dec 2007. The vin number was returned to the blue slip provider on the 20th of April. I don't know if I was the odd one out in the pile at the RTA but I hope that not all of us have to go through the countless phone calls and excuses that I done and was given. For those who have a CR and Gen3 that are looking at engineering I have a loan full underbody exhaust system if someone needs it. It easily passed the noise test. Just let us know I am in Sydney. Troy |
Congratulations Troy, when did you start your build?
It would be great to see some pictures. Regards. |
Well done Troy.
It would be great to see your car some time. I am about to go for engineering, if mine does not pass I might need that exhaust! Ben |
Good Stuff Troy - Would love to see some pics or your car in the flesh. :)
Cheers |
Well done troy.Its a top day when you get to drive your cobra legally. Did you ever get the feeling the RTA didnt want you on the road:(
Bet your happy with the performance of the Gen 3 in the Cobra.:) What are your plans...street cruiser or track attack...either way your in for a great time. Phil:) |
Thanks fellas
Took delivery of the body/chassis in June 05. Only pic I have of the whole build is when I was tring to get the body/chassis of the car trailer. Seems the camera was forgoten after that. The car is just going to be a street cruiser. at the moment. May look at the special parts later. Ben - if you need the exhaust it is at Racers Choice at Seven Hills. I met Greg there and he told me that you were close to engineering. They are doing a set of sidepipes and a roll bar for me. Troy |
I know how That forgot the camera thing goes...I have to get better on that too.
afterall has anyone seen the guts of the new carbont smiths tach>? I have... |
Troy
Well done on your CR. About the same time frame mine took to build and reg my CR. Hope you get time to come down to Wakefield Park for the Nationals to catchup with plenty of cobra nuts. Well worth the short trip if you haven't. Leeroy. |
It's a small world Troy!
I have borrowed an exhaust off Barry, it was done by Stuart also. Hopefully it is going to get me through first time! Ben |
Congratulations Troy. It's a great feeling to finally get those plates on there.
Cheers |
Congratulations Troy. You may recall we met at Oran Park (unsuccessfully) stuffing noise insulation into our cars!
I had the same dramas as you, sent paperwork to RTA end Jan got rego end June. Partly RTA, partly our engineer. Just happy its over now. Martin |
After dealing with the RTA (spellcheck says RAT) it's a relief more than a happy moment.
My engineer performed miracles to get my car passed. Then the approval for the VIN cycled from one in-box to another out-box for about ten weeks before my engineer "enlightened" the particular people to process and complete the paper work. As pneal said the RTA doesn't really want to know about these cars. Congradulations ! |
Quote:
Discouraging to hear the problems you have had with the RTA. I will be approaching engineering in the next few months and would like to know how they could possibly take 4 months to supply a VIN No? Could you enlighten us on some of the flimsy excuses that the RTA came up with during your many conversations with them. It might help me and any other builder appraoching that important stage. Any suggestions how we can speed up that process would be appreciated. Regards Baz |
Well done Troy. Yeah, you should try to make the Nationals as you will have an absolute blast.
Baz, Neil Streeting has the skills and the experience to make the rego process as painless as possible. So you are in good hands. |
Been trying to get to the nationals for some years now but my company I work for seems think that being in some far away country at that time is more benefical for my well being.
RTA where do you start? First was to get a phone number for their engineering dept Homebush. It is a very well kept secret. Once you have this phone number the one and only guy that does the approval is normally there a couple of days a week only. You pick which days. If your lucky and you do get to speek with him he will tell you that he has a pile of approvals to do and he will get to it asap. I rang every week until he finally approved it and was sending it to the VIN dept at Botany. Hint: turn off caller ID on your phone. This is where the most time was lost. They must have a policy that no one is to speek with each other. O another secret phone number. One person was on hoildays so the approval was sent back to the Engineering dept where it was put back on the pile at the bottom. Once located again it was sent back to the Vin dept once the guy had returned from holidays. I hope for future approvals for cobra owners it is a lot shorter. In that time I near put 300 unregistered km on the clock. The old "use it or lose it" motto. I am one happy chappy now though. Troy |
Well Done,
You certainly put the rego label on with a sigh of relief.
Looking forward to seeing your car, another cr on the road. The RTA are buggers and as Pneal has said they ho not want these cars on the road.:mad: I waited 9 months from submitting my paper work to receiving my Vin Number:CRY::CRY::CRY: seams as though they are back to there old tricks again. Phil |
Congrats Troy
Good to see the local CR community is still growing |
Quote:
Craig, Thanks for the encouraging words. I know Neil will do the right thing by me, but it's good to have some extra insight from someone like Troy who has been through the hoops and has experience which he can share concerning the pathetic NSW Government in all its glory along with their continuing stuff-ups and excuses. Baz |
Quote:
Thanks for the information. I am far wiser now. What's the chances of you posting those secret phone numbers for RTA Engineering and Vin No. issue? Baz. |
| All times are GMT -7. The time now is 07:36 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: