|
Nobby
Great to hear that you have found someone who can do static cling. %/ Can you let me know how they go?. I need some sign work done for the GT40 with company logos etc. I have found it hard to find a signwriter that has static cling in stock. |
No problems Bernie, I'll let you know. The stuff he showed me has a very light non permanant adhesive which can be reused and doesn't leave any residue. He tells me this is what they call static cling:confused: so i'm trusting him. So far he has been very accommodating,found all the logos for me,showed me what it will look like and he claims he can do any logos in any colour you like. Each sheet of material costs $11 printed and one sheet should fit goodyear, autolite, esso, pure and extinguisher symbol without any trouble so i figure i have nothing to lose trying them. Will keep you posted.....
.....Rob..... |
I know Blair had a set of magnetic decals made up for his Cobra
http://www.clubcobra.com/photopost/s...hp?photo=45081 May be he'll pipe in and let you know where he got them from. No air bubbles, no stroing flat - best solution I think |
Odd thing?
Hey there everyone, I ordered a vintage decal kit from Finishline and it has arrived earlier than expected.
With the car show on this weekend I figured I may aswell fit them up. I did not order any rondells or numbers as a mate in town will make them for me. Now for the odd bit. The sticker kit in the first line of this thread shows the Rondells as 18" in diameter, and in the side on image you can see that it buts against the door opening and has a gap to the side vents, well my side vent to door is about 18 1/4 inches, is my vent in the wrong spot? I am getting the Rondells made at 430mm, I think they will be a beter fit on the stripes and fit inside the front guard gap beter. So how much room is between your vent opening and door opening? I will post some pics Saturday evening (time permitting) as I will also be busy getting ready to go bush for the week. |
Not magnetic mate, but static cling!
There is only one place to get them from in my opinion; http://www.squierdesign.com/ Fast service and cut to the size you want and whatever else you want he can make. Blair Quote:
|
| All times are GMT -7. The time now is 05:57 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: