- -
Bigger header primaries
(
http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/112196-bigger-header-primaries.html)
| RET_COP |
08-21-2011 07:17 AM |
Bigger header primaries
Can I buy headers for my B&B Cobra with 1 3/4 primaries ceramic coated to replace my originals of 1 1/2 Primaries?
|
| boris_thespider |
08-21-2011 06:21 PM |
Bryan has them.
|
| jbmatth |
08-22-2011 01:24 PM |
Do you know what the cost would be off the top of your head?
|
| RET_COP |
08-22-2011 06:19 PM |
Thanks for the reply. I can see that the rear pipe on the driver side is going to be close to the footbox unless the bigger tube header is bent a little different.
|
| boris_thespider |
08-22-2011 07:26 PM |
I have the 1-3/4" pipes for my 351w and there's about 7/16" between the corner of the footbox and the header on the driver's side. I asked Barry (when he still worked at B&B) and he said that it would be fine being that close. I still ended up wrapping the header at that spot with header wrap to be on the safe side. I didn't weld my motor mounts until the headers were attached so I was able to push the motor forward as much as possible to get the most clearance.
Mike
|
| boris_thespider |
08-22-2011 07:31 PM |
Quote:
Originally Posted by jbmatth
(Post 1147334)
Do you know what the cost would be off the top of your head?
|
I decided to switch to the larger headers before I even took the smaller ones out of the bubble wrap. Since they were still brand new, never even mounted, Bryan let me pay the difference between the two as long as I paid for the shipping. I believe the difference was only about $75.
Mike |
| All times are GMT -7. The time now is 03:44 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
