| TexasSnake |
11-17-2013 04:50 AM |
Conversion to Pin Drive Wheels
Anybody converted a B&B or any other make using the Ford 5 bolt 4.5 pattern to pin drives? If so which hubs did you elect use and what wheel size, width from and rear and offset if any are you running? Also interested in what tire size you are running.
|
| mickmate |
11-17-2013 07:14 AM |
Measure the widths and backspacing of what you have now. See if they are where you want them or could they move in, out or wider.
|
| Beamo |
11-17-2013 10:25 AM |
B&B wheel
I have a late LA Exotics/B&B my suggestion would be to call Bob Vintage Wheels he did a great job for me putting in pin locks on my car. It's very simple to do. even a cobra guy can do it.::)
|
| All times are GMT -7. The time now is 05:17 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
