Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   B & B Cobra's --- Speak with Bryan Anderson (http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/)
-   -   frame smiley face (http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/125727-frame-smiley-face.html)

erudolph 01-19-2014 06:02 PM
frame smiley face
 
Hi guys, my 97 frame doesn't have the smiley face for trans/yoke clearence. does any of you have your frame handy to measure the length and width of that portion of frame. its the center of the x-member. thanks ed

lnfletcher 01-21-2014 05:54 AM
I guess I'm unsure of what your needing. I can try to get it if I know what to look for.

erudolph 01-21-2014 07:33 PM
smiley face
 
Larry, I have used your pictures as a reference, thanks. the portion of frame i need measured is rite under the trans at the yoke, its the depression in the x member. i need the width of the depression and the length so i can pre-cut the parts before cutting the frame. thanks ed

Clois Harlan 01-22-2014 07:49 AM
You might want to call Barry McGill, for the life of me I do not know what you need. Barry McGill can be reached at 417-472-7848. I am sure he will know exactly what you are talking about.

Clois

Wbulk 01-22-2014 09:23 AM
It's 4 3/4" - 4 7/8" long, front to rear, and 1 1/4" down on the inside. It's a section of a piece of pipe.


Added: That's down from the X bracing that is made of 2X3, that is flush with the bottom of the 2x4 frame. Making the X member 1" lower than the top of the 4" frame. In case you need the length of X members where it attaches to the frame, it is 19" long point to long point.

So with the 1 1/4" plus the 2x3 being 1" down it gives you 2 1/4" from the top of the 2x4 frame for the :).

erudolph 01-22-2014 07:34 PM
Thats it, i think i have what i need to continue but rite now its in the 30s' in the garage. I'll put the heat on when this below 0 weather breaks. thanks


All times are GMT -7. The time now is 11:05 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: