- -
Puller Fan
(
http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/19959-puller-fan.html)
| OhBuoy |
09-02-2002 07:26 PM |
Puller Fan
I have the stock B&B custom 4 cour radiator. I am looking for an electric puller fan for it. Anyone have any suggestions?
|
| Jim Werth |
09-03-2002 05:30 AM |
I have a 16" fan from Perma-Cool. Got it through Summit. Part number prm-19115 plus wiring kit prm-19001. Works great for me. Engines never been over 190 degrees. Jim
|
| OhBuoy |
09-03-2002 11:41 AM |
Did you use the plastic tabs through the radiator to mount it, or how did you mount it?
Thanks,
Tom
|
| Jim Werth |
09-03-2002 02:35 PM |
Tabs through the radiator. I didn't even look at the wiring diagram that came with the fan. Just hooked up the wires from the Haywire harness. Temp. sensor has two wire hook up. One needs to be grounded. Jumper the two together through a switch and you have a manual control too. Jim
|
| Mr.Fixit |
09-03-2002 02:58 PM |
I recommend against the plastic zip ties that mount through the rad. It is only a matter of time before the rad core will be leaking.
|
| Gordon Claunch |
09-03-2002 03:13 PM |
I used the same fan,made a nice little bracket out of 1/2" angle iron worked out real nice, painted it and mounted it to the frame.:)
|
| Jack21 |
09-03-2002 04:33 PM |
I used a Scotts 16" and it works fine. Some are recommending the Spal as the fan of choice.
Whatever you use for a fan, mount it with a bracket to the rad, or rad frame. Don't use those plastic through-the-rad pieces or it will damage your rad.
|
| All times are GMT -7. The time now is 12:16 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
