| OhBuoy |
04-04-2003 03:01 PM |
Mounting inner fender liners
When test fitting the inner fender liners, I notice that the pillow block bolt will rub against the fender liner. Is this common? Also, how many screws did you use to mount the liners and at what locations?
Tom
|
| Jim Werth |
04-04-2003 03:31 PM |
Just went to look at mine. Mine just touches the nut. I used a few self tapping screws to the frame then glassed it to the fender. Make sure you have most of the work done around the engine. It makes it alot harder to work on with the liners in. I used about 2 cans of spray on bed liner in each fender. I'm In the middle of a ice storm since yesterday. Now just turning over to snow. 4" to 8" inches expected. Glad I didn't put the snow blower away. Rain, ice, snow, cold, great week for vacation!! Jim
|
| All times are GMT -7. The time now is 08:30 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
