|
My build site
If anyone is interested here is a link to my little B & B build site..
http://groups.msn.com/Freds1stCobra/shoebox.msnw |
OK Fred, granted you're building your car on a budget, but where did you get a set of heads made out of masking tape? :LOL: :LOL: :LOL: :LOL: :LOL: :LOL:
Ron |
Looks great, keep the pictures coming! I hope I have time to do the same when I start working on mine.:cool:
|
Tape
Ron;
That isn't masking tape! That is a new space age compound, it is just made to look like tape because it is such a new and top secret product... I will also try to get a shot of the fusion generator, and the steam bearing propulsion system tomorrow. The engine is just to there to feed the steam bearing set up. It should go 0-60 in .02 seconds and cruise at an altitude of 150,000 feet. The oxygen mask set up should be here next week from JPL.. I hope the wipers hold up! =-) |
Don't forget the flux capacitor! (That's one of my wifes favorite lines.)
Ron |
Looks great!
Where did you get that steering column at? Is that the new one that B&B is using now or an upgrade?! Blake |
Great looking project!
Hey, I'm building a 302 also, and was wondering how you did the alternator mounting? Looks like a standard tension bar upside down on top, but what about the bottom mount? I have mine on the pass side right now, but Midstates says that will interfere and I need to move it. You might be a good source of tech advise if you don't mind - I'm puttin' together almost the same setup. We could trade horror stories of non-fitting parts! Great job and keep it up! |
Thanks
Blake;
The steering column is a basic I-Did-It GM style. That is what they gave me with the kit.. & It is great. Just plug it in... ZIPZIP; As far as the alternator bracket, you are right about the upper adjuster, but the lower one I fabricated myself. I will take a picture of the finished product after I am done and make a little drawing with the measurements and material I used. It wasn't too hard to make.. Took me about an 1 hour or so.. I will be welding it and the motor mounts this weekend.. I would be done welding by now but my welder burnt up!!! Got it back working so test fire and body installation by Sunday afternoon, and hopefully paint in about 3 weeks.. If you need anything I will email you my number.. Thanks Fred.. |
| All times are GMT -7. The time now is 02:48 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: