![]() |
Firewall Question
http://members.cox.net/wes67/firewall.jpg
The red-orange line repersents the body, the black is the firewall, the lower left opening is my area of Question... Is there a reason for this big hole? |
If you are refering to the angled opening on the driverside lower portion of the firewall. That is just the way the firewall was molded, and you have to glass that in when you install the body. You will have to glass in all the way around the firewall, and up to where the hood opening meets it (firewall) for a water tight seal, as well as all around the cockpit and the trunk. You will have to do the tunnel as well, and the rear wheel wells. Mine took about 3 packages of matt, about 60 sq. ft. and 1 1/2 gallons of resin. Have fun, it can be messy.. Lots of rubber gloves and brushes..
Good Luck Fred |
Thanks, I have all ready resined it all heh
|
Walter, don't take this personally, but if that's your picture, YOU ARE ONE UGLY CUSS!!!:3DSMILE:
Ron |
| All times are GMT -7. The time now is 07:21 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: