![]() |
Sensative Faria Temp Guage?
I have my temp sensor in the manifold just in front of the thermostat. Today on my test drive, I noticed that if the far got bouncy, the guage would bounce between 200 and 250. If I came to a stop, it seemed to hover at 200. I am thinking that it is just bouncing, but want to make sure something is not wrong that is causing it to suddenly read a correct temp over 250!
Also, my gas guage must be reversed. I filled the tank, and it is pegged below empty. Tom |
gas gauge problem
Had the same problem with gas gauge. Here is the thread that help me fix mine.
http://www.clubcobra.com/forums/show...ight=gas+gauge Check your ground on the temp gauge may be a loose connection somewhere. |
| All times are GMT -7. The time now is 04:17 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: