![]() |
Oil Tempurature Guage
Anyone install an oil tempurature guage after the fact? I would like to put a mechanical one in, but already have the dash and guages installed. I would be interested in seeing layouts with the guage added to the existing layout.
Tom |
Oil pressure Gage location
1 Attachment(s)
On the BDR the fastest and cleanest way was to remove the clock. A 2 minute job and replace with oil temp gage. Same size hole. Who needs a clock when your driving a cobra anyway.:LOL:
The clock is to the left of the steering wheel. |
Obuoy,
I installed one of these today. It doesn't take very long. You may have to drill a hole but it isn't very difficult. http://store.summitracing.com/egnsea...=KeywordSearch Bill |
| All times are GMT -7. The time now is 06:21 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: