![]() |
Standard B&B radiator question...
My engine is a 392w that will put out approximately 475 horsepower. Can I use the standard radiator that came with my kit as long as I get enough CFM from my 2 puller fans? Each fan is supposed to pull 3000 CFM at 7.5 amps. Thanks...
Mike |
Radiator
I don't know what the capacity is of the radiator from B&B.
The 77-78 Mustang II radiators have the brackets and support structure to mount to the B&B front clip. They are also narrow enough to fit inside the body. US Radiator has a Mustang II radiator that will bolt right up to the B&B brackets and with the bottom outlet pointed up so it can be routed above the frame member. HP. Part # 53160. http://www.usradiator.com/catalog.htm Get the 3 pass desert cool model. I have a 460@520HP with a single 2300 CFM 16" fan. Never operates above 190degrees. Make sure you duct the air to the radiator and have a fan shroud. |
Boris,
Your 4 core radiator will be fine just be sure you get all the air out of the system. I ran the standard radiator with my 427 for several years. I changed because I managed to get a hole in mine and wanted an aluminium cross flow radiator. Enjoy your ride. Clois |
I have to replace my standard B & B radiator. It has given me 11 years of good service. Is it a standard 4 core out of a mustang 77, 78???? Just want to be sure.
|
Wow trouble finding a stock replacement radiator.
|
I replaced a radiator in a B&B last year. It was a copper radiator from the 70's. I called a company in Gadsden, Al and they made me an aluminum radiator that was a drop in for $325.
I have the drawning if you need it. Dwight http://www.cgj.com/shop/radiators/an...ance-radiators |
Cu?i tu?n vui v? bên nh?ng ngu?i yêu thuong nhé c? nhÃ*.
|
Quote:
I have an original B&B Rad I would sell for $150. Went to an Alum but the original was just fine. Let me know if you are interested. Roger |
Need a replacement radiator for my B & B Cobra
The radiator in my car has developed a significant leak and needs to be replaced. Current unit installed is the standard brass that was supplied by B&B. I will consider both brass and aluminum as a replacement. Any help with locating a suitable drop in replacement unit is greatly appreciated.
|
Quote:
Roger |
NFLDMN - Have sent you a PM
|
aluminum radiator for B&B
I bought one last year from CGJ, cost about $325.
I have the drawing if you need it to order one from them. Dwight http://www.cgj.com/shop/radiators/an...ance-radiators |
All times are GMT -7. The time now is 01:25 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: