Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   B & B Cobra's --- Speak with Bryan Anderson (http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/)
-   -   passenger rollbar (http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/94613-passenger-rollbar.html)

ndpace 02-06-2009 01:37 PM
passenger rollbar
 
I purchased my kit 3/4 of the way done. It is going to paint soo and I want to add a passenger rollbar. The body is already on and fiberglassed. Can I do this? What about the welding? Does anyone have pictures of a passenger rollbar installed with the body on?

Thanks, Jim

brobehr 02-06-2009 06:16 PM
I would think you could, at the very least, adapt some sort of bolt-in setup.
Obviously, measure several times and cut once...

brobehr

mickmate 02-06-2009 08:07 PM
We've put quite a few roll bars in finished cars. If you're going to weld TIG is cleaner and more localised, MIG will work with a welding blanket and a wet cloth handy. It's nice to use a fire spotter for welding and keep the extinguisher handy.

duke 02-10-2009 09:55 PM
put a passenger roll bar in my b&b. Agree with advice on welding mentioned above. Only issue was you need to cut quite a bit of the fiberglass trunk liner to add the passenger bar. I ended up taking mine out and fabricating a new trunk liner. Pic's on my build site.


All times are GMT -7. The time now is 12:50 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: