|
BDR - Lower Radiator Hose
I've got a 302 in my BDR and wanted to get another lower hose to have as a spare. On the water pump-side, the diameter is 1.75". It travels about 5" and then makes a 90 degree turn, another 5" and it connects to the 1.5" tubing.
I've picked up a molded hose from NAPA, but when I cut it to the right length, I lose the larger size. Does anyone know the correct part numbers to ask for? Thanks |
I am using NAPA NBH-7344.
It is 1.75" near the elbow and 1.5" on the long end. You can cut to fit. My lower SS pipe is cut back a few inches and it is 1.5" dia. now. Before the end was cut off there was a 1.75" flair. |
Cutting the flair on the upper hose might be OK but don't cut the top on off, it will end up spitting water out no matter how tight you get the clamp or even doubled up. trust me :(
|
| All times are GMT -7. The time now is 02:03 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: