|
Front end height?
After looking through a lot of threads I finally said; just ask the question. After looking at my car last weekend it is currently sitting higher than ALL of the other cars at the Roundup. I'm about twice as high as i think I should be (2 fists)
What is the recommended distance from the ground to the front nose piece. My thoughts are that the front wheel or tire clearance should take first priority, and once set; the strength of the front suspension should keep things from rubbing. Should I use the frame as a reference or the wheel well- body? I realize that after lowering the front end I will need to be realigned. I've got a small block so the wieght change should be minimal.:o |
When you say two fists, are you talking like 6"? I thought the general measurement was about two fingers, or about 1 1/2" between the top of the tire and the outer fender lip.
|
Yea i'm up about 6 3/4" at the nose and a little under 3" at the tires. I am thinking iif I drop it 2" to start with then drive it and make sure it doesn't rub. I guess it doesn't really matter but I am thinking the lower the better.
|
You should have 2-3 fingers between tire and fender. Someone has your car cranked all the way up. Must handle like poop...
|
It's been a project (aren't they all?) but I just really got back together last week! I'm on the third engine. It's been a great learning experience costly but good. Now I am spending my time on top instead of underneath or bent over. Most of my problems were a carryover from the first owner. He owned a Cobra, I'm a Cobra owner and learning every day. The ass end really drops when you get on it. I'm going to lower the front a couple of inches and see how it handles.
I think i can jack it up and work an inch at a time until I get the level i think would be best. I imagine the springs and shocks should maintain the balance then I can get it aligned again. I've got the guy that worked on the Morrisons here in town before they moved so he has given me great info. When I get things to my liking he will straighten me out. Thanks all. |
| All times are GMT -7. The time now is 02:10 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: