Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   17 inch wheel (http://www.clubcobra.com/forums/backdraft-racing/112462-17-inch-wheel.html)

Tulsa cobra 09-08-2011 07:53 PM

17 inch wheel
 
Need to replace my front right rim. I live in Oklahoma which makes Michigan roads look like Pebble beach greens. I took it to a repair shop, but it is not only 4 mm flatter on one side, but also slightly twisted. I went to the backdraft racing website and parts section, only had 18, I have 17 polished rims only, not the fully polished.

Who is the manufacture of the rims, did not see any stamps on the rim itself.


Thanks

Cashburn 09-08-2011 09:20 PM

Do you have a bolt on wheel?

Tulsa cobra 09-09-2011 09:52 AM

No, it is a knock off wheel. The hub has a large threaded central hub that projects out, and the wheel slides over this and the knock off spindle holds it in place. I see that SPF have a "pin" style, not for sure what this is, but this rim was ordered and placed by Backraft at the factory.

Cashburn 09-09-2011 02:12 PM

Suggest you call Backdraft Parts - Roadster and Mustang Parts and get a hold of Mike. There's a limited number of those style wheels left. They are changing over to a new supplier soon. Get'em while they last...

Tulsa cobra 09-09-2011 04:00 PM

Will do and thank you very much.

Question, my hub has 5 hex bolts that protrude that line up with 5 holes in the tire, is that considered a 5 pin tire.

The confusion is that I have a boat that has a 2 pin prop, basically on the prop shaft there are two pins that extrude from it and they line up in the hub of the prop, that has two slits in it, holding the prop in place, so I consider that a pin.

I envision a 5 or 6 pin tire, having a similar pin sticking up that corresponds to notches in the hub portion, though this is probably incorrect.

Thank you again for all of your time and help.

lovehamr 09-09-2011 04:11 PM

Quote:

Originally Posted by Tulsa cobra (Post 1150495)
Question, my hub has 5 hex bolts that protrude that line up with 5 holes in the tire, is that considered a 5 pin tire.

Yes, it is a 5 pin drive WHEEL. The reason that it is stated so is that there are also 6 pin drive wheel/hub combos (original and many replicas) and spline drive combos (early 289 Cobras). There may be other knock-off combos that I'm not aware of as well but knowing what is on your own car is the important thing.


All times are GMT -7. The time now is 11:20 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: