|
Racing Harnesses
I wasn't real thrilled with how complicated the "latch and link" harnesses were in my new Backdraft, so I went searching and found these Corbeau Racing Harnesses that have a camlock release that is much easier to use. I also like the look of them. I think Backdraft or their dealers might want to think about offering these as an upgrade to the standard. I will have to put some felt or something on the back side of the camlock to make sure it isn't too cold or hot in the summer, should I be lucky enough to have young lady passenger riding with an exposed stomach. ;)
http://www.clubcobra.com/forums/pict...d=7134&thumb=1 http://www.clubcobra.com/forums/pict...d=7135&thumb=1 |
Looks nice. How's the adjustment?
|
Installed the same ones in 5 point. Very user friendly.
|
Adjustment is good Jay. I ended up cutting a bit from all four belts because of the excess amount of belt....very...very, good quality. You would not be disappointed.
Yes...vatdevil...they are technically a 5 point, but I just left the 2" belt "between the legs" fifth point off and it works great. You are right...very user friendly. That is what I wanted...not a lot of explaining to passengers of how it works!! |
I have never used anything but the latch type for 30 plus years and find they work just fine. It will also keep more of a "traditional" nostalgic look to the car.
|
I installed a set of Safecraft (camlock) last year in my BDR. They are much simpler for the wife and kids to hook in. I have my old set if anyone is interested.... No going back
|
Are they easy to install?
Thanks! Chad |
Quote:
Adjusting it to the right length takes the longest, but it wasn't hard by any means. The harnesses I ordered came with the "bolt on" ends, but I had to take the "latch hook" ends off the old ones to get them through the slots in the wall behind the seat anyway. So I just switched them out and put them on the new belts. Very easy to do. Brian |
Price ?????
|
Quote:
Corbeau 3-Inch 5-Point Harness Belts Camlock Black They put the order in to Corbeau that day and 3 days later I had the harnesses in hand. Outstanding service. |
FYI this should be the part numbers for Crow brand harness with Camlocks in factory style lengths and floor mounts:
11142 (Red) 11143 (Blue) 11144 (Black) 11145 (Purple) 11147 (Gray) |
| All times are GMT -7. The time now is 10:17 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: