|
Car #260 gets a new 347 stroker
well...I finally got my 5.0 roller motor +0.030 bore, SRP pistons, Scat stroker, Canfield 195's with 58cc chambered heads, Cometic head gasket, Comp extreme energy cam, Vic Jr. intake with a ProSystems 4150 carb in my car and on the dyno...371 HP at 5800 rpm's dropping a few cylinders on the pull and still climbing....:D need to get some new plugs, gapped at 0.042, a 6500 rpm rev limiter chip, and a little leaner air jets...then back to the dyno. What a difference over a 302 345 hp crate! also fixed the slip fit headers to flanges, and put a quicktime bellhousing....a happy camper
|
Congrats and good fun...Bill
|
WTG ...Bill. Hope to run into you this summer.
|
Just a note on the Canfield Heads and the BDR headers. Need to grind the flange for plug wrench clearance.
|
| All times are GMT -7. The time now is 11:22 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: