- -
Diff Speed Sensor Plug
(
http://www.clubcobra.com/forums/backdraft-racing/128663-diff-speed-sensor-plug.html)
| lovehamr |
04-22-2014 07:12 PM |
Diff Speed Sensor Plug
Hi all, I can't believe that this one item has been so hard to find. I probably am just messing up nomenclature or something dumb like that. At any rate, I'm assembling BDR 1311 and need the right plug to fit the speed sensor in the diff cover. When I built BDR 687, it had the right "plug" on the harness already but 1311 has a generic 2 spade plug instead. I've looked on beemer sites and places like rock auto and pelican parts but have been unable to locate the right piece. I'm sure I could cobble some ****e up to get it working but I'd rather just have the right plug end.
Anyone have any insight on where I need to look and for what?:cool:
|
| lovehamr |
04-23-2014 04:45 AM |
No experts on BMW wiring harnesses here? ;)
|
| Cashburn |
04-23-2014 08:19 AM |
We use transmission sender now.
|
| lovehamr |
04-24-2014 06:41 PM |
Why? The car's still wired for the diff, just has the wrong connector. I didn't even know that the TKOs had a sensor.
|
| Cashburn |
04-24-2014 08:39 PM |
Quote:
Originally Posted by lovehamr
(Post 1297323)
Why? The car's still wired for the diff, just has the wrong connector. I didn't even know that the TKOs had a sensor.
|
Now you know:3DSMILE: |
| lovehamr |
04-24-2014 09:21 PM |
OK smarty pants but you still didn't say why you would go through the extra time to rewire for that.
|
| Cashburn |
04-25-2014 05:36 AM |
Quote:
Originally Posted by lovehamr
(Post 1297341)
OK smarty pants but you still didn't say why you would go through the extra time to rewire for that.
|
Gauges have changed (twice since your first car) and the Tremec signal is cleaner. |
| jimbo01 |
08-28-2014 11:38 AM |
I called Tremec and they gave me the name of a guy in Texas who has the plugs for the transmission. I made a wire harness from the transmission plug to the plug on the harness next to the rear diff. After doing that I found a wire in the harness close to the tranny in the harness running down the frame on the pass side. I think it is for a tranny hook up. Looks to be the same color code as the one coming to the rear end. Check it out. The plug for the transmission has two wires and it does not make a difference as to how you wire it up according to Tremec.
|
| All times are GMT -7. The time now is 03:07 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
