| jimbo01 |
07-22-2014 12:24 PM |
Clutch Slave Cylinder Bracket
After replacing the fluid in the clutch I noticed that the bracket holding the slave cylinder moved as the clutch was depressed. I removed the bracket and push rod and replaced it with a custom bracket made from 1/4" 4130 steel. I purchased from Rosenhill their adjustable push rod. This gives me much more control over the clutch operation. I had the original bracket duplicated and manufactured using a water jet to cut the steel and then bent to the exact spects. If interested contact me at jimbo01@embarqmail.com:JEKYLHYDE |
| GLS-BDR226 |
07-22-2014 07:01 PM |
Was the original bracket what was supplied by BDR? If it will work on a T5 then I am definitely interested and will take one and will PM. Thanks.
|
| jimbo01 |
07-23-2014 12:34 PM |
Backdraft Clutch Slave
I should have been more specific in the thread. My car has a 427 with a TKO 600 5 speed. The bracket I understand would fit a TKO 500 or 600. Rose Performance parts in Texas has a bracket for the T5 and the adjustable push rod. I a impressed with the push rod as it gives you the ability to preload the throw out bearing. The push rod I have from Backdraft is not adjustable. :)
|
| GLS-BDR226 |
07-23-2014 01:04 PM |
Thanks.
|
| All times are GMT -7. The time now is 02:41 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
