|
limited-slip differential
I know backdraft sales:o the lsd but does any one know the percent of lockup?
any one have a good used one for sale? should I get a 3.46 or a 3.64 I have a 302 engine with a 650 Holley. ED |
What duration of cam at .050. If you have a 5 speed what is the OD ratio. Most likely 3.64.
|
What trans? You should go 40% no higher.
|
ED
Its a factory LSD which i believe is 25% lock up (no added clutches). Call Dan at diffsonline he can fix U up with what ever u want. Stay away from ROB at percision gear ;). I would go with the 3.64 Mark |
tremec 3550 with stage 2 trick flow cam at 70mph it is running 1800rpm in 5th gear i need more rpms for my carb to help with the loading up.
Thanks for the help in advance ED**) |
| All times are GMT -7. The time now is 06:31 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: