Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   Back in a backdraft: Sidepipe questions (http://www.clubcobra.com/forums/backdraft-racing/131368-back-backdraft-sidepipe-questions.html)

jimbo01 10-22-2014 09:12 AM

Best suggestion is to send the exhaust to Stainless Steel Specialists in TN. Have them replace the mufflers inside. I got a quote from them of $600.00 for them to replace them. This is a common problem with the factory exhaust.

Cashburn 10-28-2015 03:46 PM

Quote:

Originally Posted by jimbo01 (Post 1323347)
Best suggestion is to send the exhaust to Stainless Steel Specialists in TN. Have them replace the mufflers inside. I got a quote from them of $600.00 for them to replace them. This is a common problem with the factory exhaust.

Jim,
You should update this post on your experience.

kevins2 10-28-2015 05:00 PM

I don't have a Backdraft, but I do have pipes from Stainless Specialties and they also have a kind of rattling, chattering sound on deceleration that I'm not particularly fond of. There is no fiberglass in the stainless pipes but I believe there is some sort of ceramic wadding material that serves the same purpose. So, I'm very interested in other's experience with their pipes.

Kevin

cycleguy55 10-28-2015 07:52 PM

I have Patriot auger muffler inserts (Patriot Muffler Inserts H3843 - Free Shipping on Orders Over $99 at Summit Racing) in 3.5" tubing - no packing of any kind, but a metallic sound to the exhaust which some don't like. If these rattle it's because they're not tight enough. I pounded mine in with a mandrel and a heavy hammer. I can't remember whether I used a 32 oz ball pein or a hand sledge, but it took some force. That was after the first attempt at installation when they were too loose and the rattling drove me crazy.

jimbo01 11-02-2015 01:19 PM

I sent to Stainless Specialties a set of pipes to have new mufflers installed. Sent him $600.00 plus freight. He after several weeks more like a month or so returned them to me. I tired to install them. What a joke. The welding looked like a 10 year old idiot did the work. The mufflers also had dents in them. When I put them up to the car they were welded so far off it was impossible to get them on the car. I informed him of the mess he made and returned them. After he had another couple of weeks I had him sent them to Jay for inspection. Jay said they were garbage. At least I got my money back but no pipes. Got a new set from Jay and they fit. The noise from the new pipes is not to bad.
As for me I will never do business with Stainless Specialties again.

jimbo01 11-02-2015 01:22 PM

Should you need some pictures of some junk pipes with work by Stainless Specialties email me: jimbo01@embarqmail.com

427BDR 11-07-2015 06:42 AM

Quote:

Originally Posted by jimbo01 (Post 1369976)
Should you need some pictures of some junk pipes with work by Stainless Specialties email me: jimbo01@embarqmail.com

Jim thanks, I actually came across your thread detailing your experience with stainless specialties during my search for new pipes. At this point I've had enough with the backdraft pipes and I am nearing an order with Classic Chambers for a set of their cobra pack mufflers. I've read dozens of reviews of their product and listened to several video clips, so at this point I think I may just have to take the plunge and go with Classic Chambers and hope they solve the crappy rattle from these backdraft pipes.

ASO544 11-07-2015 12:37 PM

Keep us posted on your results asfar as sound and performance....and of course price

EBruce 01-30-2016 05:15 PM

One of my pipes is rattling so bad it sounds as if it's falling apart. It's embarrassingly loud from outside the car. My other pipe sounds fine.

Has anyone figured out a fix yet on these?

Jay-do the new cars have different side pipes now (mines from late 13')

Rare Iron 01-30-2016 07:49 PM

The only way these Cobra mufflers would "rattle" is if the cores come loose inside, then it's simply time to replace them with something else. High horsepower does not make them rattle - something wrong with the construction does, or if they are old & the cores get rusted-out. Old mufflers can look good on the outside, but when you cut them open they can be rust flakes. Cut many open at Tenneco & many that were just 2 years old were rust powder inside.

tpatodd 01-31-2016 11:40 AM

Quote:

Originally Posted by EBruce (Post 1379168)
One of my pipes is rattling so bad it sounds as if it's falling apart. It's embarrassingly loud from outside the car. My other pipe sounds fine.

Has anyone figured out a fix yet on these?

Jay-do the new cars have different side pipes now (mines from late 13')

Like Jay suggested in this thread, this sounds like the heats shield. I had the same issue (sound) and found the bolt snapped off the HS strap. In the 2-years I have owned my BDR, I have now replaced a strap 4 times.

EBruce 01-31-2016 08:44 PM

Quote:

Originally Posted by tpatodd (Post 1379243)
Like Jay suggested in this thread, this sounds like the heats shield. I had the same issue (sound) and found the bolt snapped off the HS strap. In the 2-years I have owned my BDR, I have now replaced a strap 4 times.

Thanks for the input but I can assure you it is not the heat shield. That was the first thing I checked and when I used a rubber mallet on it the sounds were coming from inside. I am certain it's the core but don't know what to replace it with yet.

wkooiman 01-31-2016 09:16 PM

Classic Chambered
 
I switched to the Classic Chambered mufflers on my car, and I love them.

I have a Contemporary with a 428 and it had the original mufflers. I didn't measure the flow path, but I'd guess about 1 7/8".

The CC mufflers are 3", 24" long, with packing, and I installed them with the baffles facing forward, as recommended by CC. They are slightly louder than the original restrictive mufflers, but not bad at all. I have a chop saw and a MIG, so it was an easy project.

I also installed O-2 bungs while I was at it. I plan on having them ceramic coated, but I was getting tired of not having my car on the road, so that's for another day.

jimbo01 02-03-2016 09:46 AM

I do not know how my old post regarding the sending of the side pipes to Stainless Specialties became associated with this post. On my original post I did make the comment but after sending the pipes to them and having them damaged he returned my money and left me with no pipes. Got a set from Jay and they are on the car now. I cannot recommend Stainless Specialties at all.

jimbo01 02-04-2016 01:16 PM

I don't know how this old post got on you request for side pipes. I sent my pipes to Stainless Specialties. You can't believe what he did to them. I eventually got the money back I paid him and bought a new set from Jay. The old ones were trash.

EBruce 02-04-2016 06:45 PM

Quote:

Originally Posted by jimbo01 (Post 1379658)
I do not know how my old post regarding the sending of the side pipes to Stainless Specialties became associated with this post. On my original post I did make the comment but after sending the pipes to them and having them damaged he returned my money and left me with no pipes. Got a set from Jay and they are on the car now. I cannot recommend Stainless Specialties at all.

Did the new set fix the horrific rattling?

Jay-did Reg change who they sourced the pipes from?

RRRuiz 02-04-2016 08:01 PM

Nothing more annoying than a rattle that you just can't pinpoint. Best of luck correcting the problem.

Cashburn 02-05-2016 12:11 PM

Quote:

Originally Posted by EBruce (Post 1379861)
Did the new set fix the horrific rattling?

Jay-did Reg change who they sourced the pipes from?

Yes. It changed in the 1200s I think.

aaddmann 02-13-2016 05:57 AM

Side Pipes Rattle
 
Quote:

Originally Posted by 427BDR (Post 1322673)
Hi All

I't been a few years but I'm finally back in a backdraft, took delivery last week. Car runs great and happy with it so far, but noticed the sidepipes chatter / rattle a lot more than i remember. The "chatter" is nonexistent when accelerating, but when I lay off the gas and the car is in gear around 2K-3K rpm the side pipes rattle pretty good.

Has backdraft changed anything with the side pipes in the past 2 years?

I have a big block chevy in mine and the side pipes rattle because the baffle is loose. I'm in the process of repairing as we speak . Does anyone know where i can buy header flange gaskets in copper 4 1/4 square with 4 1 7/8 to 2 inch holes?

EBruce 02-14-2016 02:27 PM

Quote:

Originally Posted by Cashburn (Post 1379920)
Yes. It changed in the 1200s I think.

Thanks Jay, that would be mine. What is your solution if a car came into your shop with this issue?


All times are GMT -7. The time now is 09:09 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: