|
non-traditional dash
When I ordered my chassis I had some specific requests on the interior and top of that list was that I didn't want switches on the dash. Alistair Miller fabricated a bracket that mounts under the dash for the switches to control lights, hazards, wipers, and the fan. No start button either.
The dash is clean, and the under-dash panel is easy to access without becoming an obstacle. http://i.imgur.com/7kD1Inll.jpg?1 http://i.imgur.com/NuFhfO9l.jpg |
Looks good. I also like a clean dash. Mine will only have ignition, start, lights, wiper, and a temp gage selection switch. The temp gage switch is to only run one gage for water, oil, trans, and diff.
|
| All times are GMT -7. The time now is 08:12 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: