|
Hood Screws
I want to install a set of numbers on my painted rondel and was wondering if what looks like allen set screws around the front and sides of the hood are removable with causing any issues or do I need to cut out numbers around them. I did not want to risk breaking the screw heads if they are not actual screws or are glued in. Thx
|
Just allen head screws.. Righty tighty lefty loosy
|
Hello Rubicon4me2!
You can screw them out. Those where just screwed in the fiberglass. I also put a number on it. Be careful, don‘t tighten it to much in the fiberglass. Good luck |
| All times are GMT -7. The time now is 12:59 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: