|
Hood and trunk latches
Hello!
I don‘t have the keys anymore for the hood and trunk latches lock! Is it possible to change just the locks in the latches or do I need to buy a complete new set? I hope someone can help with that, because the latches are powdercoated black and i would like to keep them instead of a new set. Thanks from germany Marc |
drive down to your local locksmith and see if they can make new keys.
|
I had a set made from my local locksmith. Not a problem.
|
Ok thanks!
I will try to get some keys at a local locksmith! Will tell if it works! |
Today I went to a locksmith and they told me, that they can‘t make a new key for the latches, because they need 1blank key and 1 old key to replic it. Also is the problem, that they need an blank USA key and they only have german blank keys.
Who is the manufacture of the backdraft hood and trunk latches and is there a number on it to order some new keys? Thanks for help! |
Mine has WBH marked on the keys Weston body Hardware in the UK.
Link is here:B20 But I have a very early car. I'd contact Backdraft parts and ask who their vendor is. (Chances are since you have a late build# the vendor has not changed.) Probably the simplest route would be to order a complete chrome latchset from Backdraft Parts. https://www.backdraftparts.com/produ...-lock-set.html They show out of stock but their sister website does show instock. https://www.iconicparts.com/three-lock-set.html Pull the snap ring off the base and cannibalize the lock tumbler sets for your Black Powdercoated handles. You'll end up with silver lock centers on the handles but they'll eventually get silver scratches in overtime anyways. |
Thanks for that info spdbrake!
I probably have to do it like you said! |
when spdbrake talks people listen ...because 99.9% of the time ....he is right :D
|
My keys are marked "WBH" also, and my car is 6 years old. Nice to learn about Iconic Parts as an alternative to BDR Parts.
|
Well, DUH! I just noticed that Iconic has the same address as BDR, so one can assume that they under the same (mis)management.
|
Quote:
|
For what it is worth, these keys look exactly like the keys from my MG Midget back in the day. Perhaps an MG key blank is on the radar over there?
|
Warning: Trunk latches/hood latches if you have an early car 1st generation check the hole mount spacing old cars 43mm or 1-11/16 more or less. The trunk latch, I just rec'd from BD/Iconic Parts is 38mm!!!! Will you be as pissed as I was on the 5mm difference since i didn't notice until after I cut the shaft and tried to mount it, damn!! Happy Easter.
|
No stop
|
| All times are GMT -7. The time now is 11:57 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: