Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   Cobra horn button in the steering wheel (http://www.clubcobra.com/forums/backdraft-racing/142151-cobra-horn-button-steering-wheel.html)

Pastormajorquin 03-22-2019 10:09 PM

Cobra horn button in the steering wheel
 
Hello guys!
I would like to make a working horn button into the middle of the steering wheel! I think it will be a lot safer than trying to find the little red button in a
accidental situation.
Who allready did a conversion of this button into the steering wheel?
Would be glad to get some infos, what parts i need.
I allready have a momo steering wheel with a horn button.
I think I need something that is called in english slip-ring or so for the electrical contact.

Thanks for help

Marc

spdbrake 03-23-2019 09:48 AM

Mounting this wireless RF xmitter button under the horn button should be pretty easy.
https://www.amazon.com/Wolo-RC-100-W.../dp/B00LJ19V4U
https://wolo-mfg.com/model-rc-100-wi...ol-system.html

Or this method from scratch.
Wireless Car Horn | GTSparkplugs

Ozzie Goat 03-23-2019 03:12 PM

^^
that is cool as heck

Pastormajorquin 03-23-2019 11:00 PM

I thought about something like that, but is there not a normal solution like all the other old cars have. The signal lever is from VW beetle, but there should be something like the beetle has. What about the newer backdraft cars, they have another signal lever and steering console! Would be glad to get more informations.

tortuga 03-25-2019 06:11 PM

Very cool, I was thinking something wireless would be the only way aside from slip rings...

CHANMADD 03-25-2019 08:46 PM

Mine works, its a Momo with slip ring and VW beetle turn signal with the high beam switch on the back of the lever. I made an insulation pad between the turn switch and the slip ring....to insulate it ..electrically..and it holds the ring from turning. The wire got a shrink wrap for strength and goes under the switch and through the dash to ....
If you already have a floor dimmer you can use this switch for a horn too.

lomdel 04-08-2019 06:50 AM

1 Attachment(s)
The current standard wood-rim steering wheel as supplied by Backdraft does have the horn-button wired in the centre. I replaced the Backdraft logo on mine with a Cobra logo from Finishline.


All times are GMT -7. The time now is 03:49 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: