|
Steering wheel hub
1 Attachment(s)
Hi everyone.
Quick question for those of you have been there. Is the hub pressed on and do I need to use my puller to take it off. Took off the nut and its on there pretty tight. Making sure before I start yanking on it. Thanks as always for the help Fred |
Hi Fred,
Mine's not a Backdraft so could be different to yours....but I've not ever seen a hub/boss that is pressed onto the spline. It could be a bit reluctant to come off easily if it's been on there undisturbed for some time, bit it should come off without the need to use a puller. Cheers, Glen |
Thank you.
Fred |
A puller is sometimes needed to get it off even though it is not a press fit.
|
| All times are GMT -7. The time now is 01:01 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: