Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   Looking to purchase a Front Knock Off rim (http://www.clubcobra.com/forums/backdraft-racing/143363-looking-purchase-front-knock-off-rim.html)

riggsjr 03-12-2020 01:45 PM

Looking to purchase a Front Knock Off rim
 
When I bought my 2017 BDR cobra I new that the front rim was bent. I went on Iconic to purchase another and found out through Jay that the color has changed.(again Jay from Vintage is very knowledgeable). I confirmed this with Perry at Iconic.The color changed about 2 years ago and my BDR being 3-4 years old there is going to be a difference in color. Wondering if anyone has an older 18 inch Front Knock Off rim to sell . The wheel is an 18 x 9 .You can text,call or IM me.
Thanks
201-988-5211
Regards,
John

spdbrake 03-12-2020 02:49 PM

It looks like there are 5 or so rim repair shops within a few miles of you.

Typically they can also paint. So if your old rim is cracked (non-reparable) they can eye-match paint the new wheel if it goes that way.

riggsjr 03-12-2020 02:58 PM

Yes. I touched base with 2 of them. Might be the way to go.Hoping to luck out and find a good used one.

ERA174 03-12-2020 03:06 PM

You may have looked into this already. However, did you contact the wheel manufacturer (not BDR), to inquire if they have any old inventory or could reproduce a wheel that would match your wheels? I'm assuming BDR is not the manufacturer of the wheels, that they out source them. Maybe another wheel manufacturer could reproduce a wheel to match your wheels?
On another note, I'm currently doing upgrades to my ERA Cobra and hope to have it back on the road later this year. Upon completion I'll be looking to get out and do some driving, if your interested I'll keep you in the loop.
Good luck in your search.
John

riggsjr 03-13-2020 06:06 PM

Got the rim straighten today. Went back to the same place as I went yesterday. A different guy. The first guy said he would get the rim back but would need another rim to match the color after he destroys the bent one to fix it.This guy said he would try to heat it and and bend it back with a led hammer and rag. It worked! I had him speed balance it and speed balance the other front rim.The other rim was off also as both rims might have played a part as I had a slight shimmy at 70 MPH.$65 later,should be good to go.

spdbrake 03-13-2020 07:34 PM

Good news! congratz


All times are GMT -7. The time now is 01:28 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: