- -
Badging
(
http://www.clubcobra.com/forums/backdraft-racing/143906-badging.html)
JoelMcComas |
07-31-2020 11:08 AM |
Badging
Contemplating replacing the "Powered by Ford" badging on the side of the car with a 427 badge. I've seen some on Finish Line and other sites. Is there a good website everyone uses for that kind of thing? Don't want to end up with some rinky dink badge etc...
|
KDubU |
07-31-2020 12:27 PM |
Yes there is. Billet Badges makes some real nice ones and they cost but again they are quality pieces.
|
Dwight |
07-31-2020 01:28 PM |
Finish Line
|
Mark IV |
07-31-2020 01:34 PM |
Do a search and see the issues with Finish Line.....
|
spdbrake |
07-31-2020 01:49 PM |
|
JoelMcComas |
08-03-2020 11:46 AM |
Thanks, I've used finishline a couple of times before. Once it was quick delivery, the second time took a bit but the issue was addressed immediately. I spoke to the guy who runs the business and he was apologetic and helpful. Actually like the idea of supporting his business, keep as many Cobra resources going as possible!!
|
jolsen42 |
08-04-2020 08:42 AM |
Finish Line. I use them all the time. Never a problem with delivery. As a matter of fact, just placed two orders with him and received inside of two weeks. One of them was for a 289 side emblem, "Powered by Ford", excellent quality.
|
nathanmargolis |
08-04-2020 08:53 AM |
I own an older Backdraft with mentioned badging that has threaded studs. Purchased Powered by Ford badging with the stick on tape. Peeled off tape and pressed on the existing badging. New badging is thin aluminum and it looks just fine. Actually, would say looks perfect.
|
AdamIsAdam |
08-05-2020 02:20 PM |
I have new badges to put on. I recall seeing measurements for placement. Does anyone have that handy?
|
KDubU |
08-06-2020 03:24 AM |
|
AdamIsAdam |
08-06-2020 03:49 AM |
Thank you. But my badge is a stick on variety. Can anyone please measure the distance between the bottom of the badge to the top of opening? And also the left-right alignment somehow?
|
xb-60 |
08-06-2020 04:13 AM |
Quote:
Originally Posted by jolsen42
(Post 1480846)
Finish Line. I use them all the time. Never a problem with delivery. As a matter of fact, just placed two orders with him and received inside of two weeks. One of them was for a 289 side emblem, "Powered by Ford", excellent quality.
|
I ordered two of the 289 badges ("POWERED BY FORD") quite recently, and they turned up quickly as promised....and I'm in Australia.
I'd use them (Finishline) again.
Cheers.,
Glen
|
AdamIsAdam |
08-22-2020 09:29 AM |
2 Attachment(s)
Circling back with pics, because without pics, it didn't happen, right? :D
I had to wait for the PPF to cure. Since my badges are stick on, the reference points in the ERA diagram don't totally work (no peg holes). But as best as I can tell, 1/2" above the vent openings and centered, looked about right. I also quickly realized that using a level wouldn't work because who knows if the car and/or garage are level. So instead I used 1/2" wide electrical tape to create a parallel line above the vent hole, marked center and in the end, eye-balled it! :eek:
In the garage it looks good. We'll see how it looks outside later.
Attachment 35106
Attachment 35107
|
JoelMcComas |
08-25-2020 11:01 AM |
Ordered my badge from finishline.com on 8/5/20 and still haven't heard anything...
|
AdamIsAdam |
08-25-2020 11:12 AM |
1 Attachment(s)
Updated pic. You can see the badge if you squint. :D
|
Mattsvtcobra |
08-30-2020 07:56 AM |
Quote:
Originally Posted by JoelMcComas
(Post 1481756)
Ordered my badge from finishline.com on 8/5/20 and still haven't heard anything...
|
Any luck yet? I really want to do the Powered by Ford one, but don't want to order if it is a pain to get from them.
|
AdamIsAdam |
08-30-2020 10:16 AM |
1 Attachment(s)
I'm very happy with this one. It says it's an official Ford product on the back. Quality, heavy piece.
|
Mark IV |
08-30-2020 11:10 AM |
|
All times are GMT -7. The time now is 07:22 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: