Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   Windshield (http://www.clubcobra.com/forums/backdraft-racing/147354-windshield.html)

coach36 10-06-2023 10:30 AM
Windshield
 
Hey, I'd like to give my windshield a little bit more rake. A more laid back look. Anyone done that? What needs to be done?

patrickt 10-06-2023 10:47 AM
Quote:
Originally Posted by coach36 (Post 1520728)
Hey, I'd like to give my windshield a little bit more rake. A more laid back look. Anyone done that? What needs to be done?
With the caveat that I have never touched a BDR's windshield... ever... I would point you to the windshield posts and the bolts and holes in the picture below (which is not a BDR, but I'm betting it's close). See if you can loosen those bolts and then adjust the windshield rake to your liking and then retighten. This is how you get an ERA's windshield to mate just right with side curtains.

https://i.imgur.com/eYYn44G.jpg

Dominik 10-07-2023 02:17 AM
You could even drill all holes a bit bigger to allow more play. Bear in mind that your soft top won't fit anymore after you did this.

A former racing driver (Shelby team) claimed 500 to 800 rpm more down the long straights with a 289. But that rake was drastic. Angle had probably discussed here a few times.

FredG 10-11-2023 07:37 AM
Windshield
 
I took my windshield out when I replaced the dash. The windshield is straight across and comes out easily. You could, potentially, modify the ear or make a small bracket to do what you are proposing. There is not a lot of room under there. Just be warned that the windshield will easily break if put under torque or tension when re-installed. You could, potentially, run into a sealing problem on the bottom. Good Luck.

Fred

http://www.clubcobra.com/photopost/d.../thumbs/ws.jpg


Quote:
Originally Posted by coach36 (Post 1520728)
Hey, I'd like to give my windshield a little bit more rake. A more laid back look. Anyone done that? What needs to be done?


All times are GMT -7. The time now is 03:46 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: