|
Hex nuts instead of spinners
1 Attachment(s)
Does anyone have any idea if these will fit the rt4b pin drives. Instead of using the spinners?
Details: Hex Nuts billet T6061 unpolished set of 4 . alternative to spinners - requires 3 inch socket. 2 x left 2 x right Thread depth 1.4 inches. 8 TPI thread 2 21/64 inch. 60 degree chamfer. Includes a set of AC01 safety clips |
I was hoping someone would chime in here, as I'm also interested (Backdraft RT4B). Spinners and safety wire are functional and have the look, but for running track vs. road tires or other situations where there is significant swapping these would save lots of time.
|
You might contact Vintage Wheels. They are very familar with Cobras and should know the answer.
John |
| All times are GMT -7. The time now is 12:00 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: