|
u-joint snap, what part
backdraft #84
The rear u-joint snaped on my drive shaft I have a 302 with a t5 and the drive shaft want come out of the tailshaft it should slide but want move where do i get the parts and is this a problem for this u-joint. I'am easy on this car and i can't believe it should have snap unless bad part |
Contact Reg for a new driveshaft. If the old one is giving you problems coming out, use a slide hammer. If that doesn't work, toss it in the back of your truck and haul it to a tranny shop. They remove them for a living. Yes, that means that if the slide hammer won't do it, you'll have to remove the tranny.
We've had 3 or 4 driveshafts break but that's it. Good luck. Boudy |
| All times are GMT -7. The time now is 08:09 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: