Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   Letters From The Field! (w/time slip) (http://www.clubcobra.com/forums/backdraft-racing/54684-letters-field-w-time-slip.html)

Boudy 06-14-2004 09:55 AM

Letters From The Field! (w/time slip)
 
Well guys, we're back from Tulsa. The Mid-America Meet was great.

Ol' #42 was in rare form. It's timing was off and caused us to run warm all weekend. Now I get to install a timing pointer and tune it up this week. I'm sure we were down 30-40 ponys.

Hallet Motor Racing Circuit was fun and the stock T/A's gave us some pretty good laps in the low 1:31 range. It was a touring show so we couldn't really ring em' out.

Tulsa Raceway Park was where we had the most fun of the weekend. #42 made it's first venture down the strip and did it respectably. We made it to the finals and took 2nd to a big block with slicks and all the other goodies... No shame in getting beat at the tree when your R/T is .172.

The 13.155 isn't bad, but we're going to make more passes after it's tuned up. Then we'll change from the T/As to slicks and see what happens.

Special Thanks to Jay Nordstrom for handling the driving duties at the drags. My R/T would have been a respectible 5 seconds.

Boudy

http://www.clubcobra.com/photopost/d...e_Slip-med.jpg

Doug I 06-15-2004 11:19 AM

that good old #42 sure has been a reliable workhorse. :)

JayBar 06-15-2004 12:38 PM

Boudy,
Tell us about old #42. i.e. build info etc.

Jay B

Boudy 06-15-2004 12:54 PM

We'll the first engine was a 302 that exploded when a poly-loc backed off and the rocker came lose. Now, it's got a 347 Stroker. Scat 9000 crank, Scat Rods, Forged Pistons, and it's balanced. Performer RPM 2.02" heads that are ported and the bowls are blended. It uses a Trick Flow hyd. roller cam. Stage III, the hot one. Air gap intake w/matched ports and a 670 Street Avenger. Tremec 3550, 3.91 gears, and stock tires/wheels. T/A Radials.

She put down 339 HP to the wheels when built. I haven't re-dyno'd it since it's broken in.

Boudy

Doug I 06-15-2004 01:34 PM

and to those who haven't heard it ....... it does sound sweet !!!!

Boudy - was that rocker event at NPR last gyear ?

And if one was say "I'd like an engine just like it in my BDR" the reaction would be?

regards

Boudy 06-16-2004 07:46 AM

Yep, that was the engine turned boat anchor in LA last summer.

Boudy


All times are GMT -7. The time now is 12:07 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: