| tfarhood |
09-07-2004 10:18 AM |
Help - Slave Cylinder info
I need a little help with info about the slave cylinder. My threaded rod between the slave cylinder and cluth fork got a little out of adjustment and allowed the piston in the slave cylinder to pop out while shifting from 1st to 2nd. Thank goodness I was only 3 blocks from home. Here is my question; Does anyone have a part number for the slave cylinder or know if a new piston seal is readily available from NAPA or a car dealer? Reg is not available to ask due to the hurricane and I need an answer fast. I am scheduled to have the car dyno'd this Saturday, so I need a repair quickly. Any info on seals or entire slave cylinder would be appreciated.
Thanks.
|
| tfarhood |
09-07-2004 04:47 PM |
For those of you that have the newer cars (mine is #101), the slave cylinder is that of a 1988 Mazda B2200. The dealer couldn't help me with the slave or the seals, but the local auto parts store had the exact slave for $15. Why fix it if you can replace it for that amount. The dealer wanted $60 and didn't even have it. It pays to check around. Thanks to Frank Dodd for the info, and for answering the phone in Florida while recovering from the hurricane.:)
|
| Dennis Kelley |
09-07-2004 06:41 PM |
Good info to know. I've logged it in case I need one in the future.
Thankks
|
| Sean Comerford |
09-08-2004 05:36 PM |
Anthem Motors in Phoenix sells a Wildwood slave cylinder with bracket, line and fittings that is much better than factory. Look them up at www. anthemmotors.com. Tell Jon I said Hi. |
| Nor Cal Al |
09-08-2004 05:59 PM |
Anthems Wilwood package is really neat and works well. If you have the short clutch arm and choose the outer hole on their mount, it is a perfect setup(a pull not a push). Their bracket set is machined aluminum and bolts through the motor mount. Caution, make sure you get all the necessary fittings. I was missing the adapter fitting for the hose to slave connection and could not find locally (wrong type flare). I had a custom hose made.
P.S. the slave is available from Summit.
|
| All times are GMT -7. The time now is 06:42 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
