|
BMW wiper motor wiring
I am attempting to connect a BMW 2-speed wiper motor to a Lucas three position toggle switch (35927). Both have 5 available electrical pins. I assume that this hookup should allow the motor to park the blades when in the off position like the origional Lucas motor (LW14). I think this is a standard setup used for Backdrafts.
Can anyone help me with the wiring schematic for this combination? I know the numbers for the pins on the Lucas switch and wire colors in the motor harness plug. I need to know how to correctly connect them. thanks |
Wiring help
See if this wiring schematic may help. The wire color connections to the rear of the wiper motor from left to right should be:
- Black - Ground - Green - White - Purple - Pink |
| All times are GMT -7. The time now is 08:45 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: