Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   BDR-351w with RPM air gap... (http://www.clubcobra.com/forums/backdraft-racing/60720-bdr-351w-rpm-air-gap.html)

got snake? 01-19-2005 07:29 PM

BDR-351w with RPM air gap...
 
Will it fit? Well I guess I should ask if the Vic Jr intake will fit. If that does then the air gap shouldn't be a problem. Any input?

sid

Dennis Kelley 01-19-2005 07:46 PM

I have an RPM air gap on my 302 BDR and I run a drop based 3inch by 14 KNN. I've seen several 351 cars with vic jrs. I don't think it will be a problem. I think the 302 is 1 inch lower so you may have to run a 2 inch by 14 air cleaner.

later dennis

Backdraft 01-19-2005 07:50 PM

Hi there,

With a 351w engine you can still run a Super Vic intake. You need to use a dropped base air cleaner to clear the hood. The standard FMS Oval Cobra air cleaner will also fit but the clearance is tight.

Reg

Secret Squirrel 02-24-2005 02:46 PM

1 Attachment(s)
Sid,

I have an Edelbrock Airgap intake on my 351w with a drop base air cleaner and it clears the hood just fine.

got snake? 02-24-2005 05:20 PM

Do you think the Edelbrock Pro Flo air cleaner will work? Cause thats what i got.

Sid

Jack21 02-24-2005 06:16 PM

Getting air cleaner clearance on any 351W Cobra is a challenge. And, smaller air cleaners, even the Edelbrock oval, cost HP as I learned during dyno testing.

Best compromise was K&N 11" which filters through sides and top. And, as I learned, the filter element on the Edelbrock oval (a K&N), is also an 11", and fits the K&N 11" top, and is slightly taller.


All times are GMT -7. The time now is 06:04 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: