![]() |
clutch disc in differential?
hey guys,
I just bought a used Limited slip diff and I want to replace the clutch disc's (plates) I have done this job on a 8.8 ford diff but never on a BMW LSD. If you know how or can direct me in the right direction I would appreciate any info. thanks Dennis. |
Ask Dan
dan@diffsonline.com diffsonline.com The regular BMW shop manuals don't have this info. Unless you suspect something is wrong with the diff. just leave it alone. Chet |
LS DIFFS
DENNIS,
AS CHET SAYS IF ITS WORKING OK LEAVE IT!! THESE ARE NOT TROUBLESOME PARTS. I WILL TALK TO OUR DIFF MAN IN THE MORNING AND TELL U HOW TO REPLACE THE CLUTCHS SHOULD U WANT. IF U NEED DROP ME A LINE AND I WILL SEND A SET OUT TO REG FOR U. TAKE CARE, |
| All times are GMT -7. The time now is 05:27 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: