Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   cobra air cleaner (http://www.clubcobra.com/forums/backdraft-racing/64912-cobra-air-cleaner.html)

letitbe 05-31-2005 06:46 AM

cobra air cleaner
 
Does anyone know if there is a clearance problem with an oval cobra style air cleaner used on a BDR. The car has a 302 (342 stroker)?

Letitbe

Clois Harlan 05-31-2005 06:51 AM

You should be fine with your clearance unless you are running a big spacer between your carb and your manifold. I had looked at a SB BDR with the large oval air cleaner last year at the Hot Rod Tour. I ran one on my B&B for a couple years as well when I ran a 302.

Clois

letitbe 05-31-2005 07:56 AM

Thanks Clois, for the feedback. I noticed you are in Tulsa. A guy I know in OKC built a cobra a few years ago with a 427 FE in it and sold it to someone living in Tulsa. Do you happen to know who it is?

I bought a new BDR in January and it is still sitting in Florida in in The BDR shop. I live in Mexico (Playa del Carmen) but I am from OKC. I will probably be back in OK this summer and may have the Cobra there too. Sounds like there are quite a few Cobras in OK and hopefully the CLUB will come together soon. Cant wait to close down here and get behind the wheel of the new car.

Good luck with the club and keep me informed.

Letitbe
www.letitbeinn.com

Cashburn 05-31-2005 11:54 AM

Just be careful with the carb spacer selection. The rear of the cleaner will have to tuck under the cowl area lip. But there are plenty of BDR's with the oval cleaner in them.

This one comes real close but it does clear:
http://www.vintage-motorsports.com/s...8418836IMG.JPG

davidlee 05-31-2005 02:15 PM

Cashburn,
I don't mean to hijack the thread but did you add the hood prop/support or did BDR get away from the gas shock?
Thanks
David

Cashburn 05-31-2005 03:31 PM

Quote:

Originally posted by davidlee


Cashburn,
I don't mean to hijack the thread but did you add the hood prop/support or did BDR get away from the gas shock?
Thanks
David

Good eyes! The gas strut is history. All our cars have been with the prop rod, our lowest was #188. Don't know offhand when the actual switch over was in production though.

davidlee 05-31-2005 03:54 PM

Is it the one from Fineshline or does BDR produce it themselves. I would like to get one since my hood has blown down a few times during some car shows. ouch.

David

Cashburn 05-31-2005 05:32 PM

I believe BDR is manuf. themselves now. However most if not all parts that Finish Line sells can interchange, since they are often the prototype.

Nor Cal Al 06-02-2005 01:36 PM

RE: Air Cleaner,
My BDR has the 392 crate motor with a Holly Street Avenger 770. I bought the Ford Racing small oval air cleaner and it clears just fine.


All times are GMT -7. The time now is 09:09 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: