|
Brake light switch
My mechanic about had a litter of lizards when the brake light sender on #139 failed on the highway and the brakes quit.
Bottomed out. The sending unit says "Made in Italy." That's it. That's all we know. Replaced it with a Delco unit, it blew apart in five stops. Put my mechanicien in danger yet again. Reg, anybody, whose brake cylinder is in build #139 and whose brake light switch do I order? The car is sitting in the local Ford garage waiting for parts, we don't know who to call. No, calls to Reg hit an answering machine. This is something simple but we don't have the answers. UT |
UT
I had to replace mine after a little over a year of service, just quit working. I used a Borg Warner part number S551, pretty good quality switch. Hopes this helps, got mine at a local ORIELLY'S. DON |
Brake light switch
NAPA echlin part no SL147. Just changed mine tonight worked well. I know this is an old thread but I think some guys may need this Napa No.
later Dennis |
When you replace the swith do you have to bleed the master cylinder or does it just screw in and out.
Thanks |
madmaxx
I just screwed mine out and put new one in no bleeding, leave the cap on and only a few drops of fluid came out. DON |
Thanks DC, mine is still working but I have state inspection comming up and with my luck they will stop working as I pull into the place. In reality though I have not had a problem since I worked the little bugs out.
|
| All times are GMT -7. The time now is 03:37 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: