Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   Clutch Master Cylinder on a BDR (http://www.clubcobra.com/forums/backdraft-racing/76220-clutch-master-cylinder-bdr.html)

Trueoo7 01-25-2007 09:53 PM
Clutch Master Cylinder on a BDR
 
I have the stock cylinder and was wondering if anyone knows what size fitting is used for the tubing that leads out of it and also into the slave cylinder. I'm thinking about changing the tubing to flexible stainless steel hose so I can reroute it away from the headers.

Thanks

Dinobyte 01-26-2007 11:31 AM
I think Reg from BD should be chipping in on this, as this is a major problem with my vehicle as well. What options do we have Reg?

Cashburn 01-26-2007 12:41 PM
Should be interchangeable with the Wilwood unit:

http://www.wilwood.com/Products/006-...MC/alumdwg.gif

Trueoo7 01-26-2007 11:08 PM
Thanks Jay, I'm assuming the slave cylinder is the same size thread outlet?

Cashburn 01-27-2007 07:46 AM
It depends on the slave. I have not looked at the standard factory slave in a solid year +. We are using Wilwood slaves exclusively at this point.

Dinobyte 01-27-2007 03:21 PM
Quote:
Originally Posted by Cashburn
It depends on the slave. I have not looked at the standard factory slave in a solid year +. We are using Wilwood slaves exclusively at this point.

They are not compatible. The AN lines are different than those delivered on the Wilwood. Be prepared to jump through hoops (trial and error) to find the correct size, as there is not a standard.

Cashburn 01-27-2007 04:56 PM
Quote:
Originally Posted by Dinobyte
They are not compatible. The AN lines are different than those delivered on the Wilwood. Be prepared to jump through hoops (trial and error) to find the correct size, as there is not a standard.

Earls Part Numbers:

EAR989544 Clutch - Brake Fitting for
EAR64191918 Clutch - Brake Hose for

Aeroquip Part Numbers:
AERFBM2611 Clutch - Slave Fitting

No flaming hoops to get burned on :3DSMILE:


All times are GMT -7. The time now is 02:51 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: